UltraSwing® Mega-Fit Spare Tire Hitch Mount
UltraSwing® Mega-Fit is in-stock and has a 1-2 week processing time.
Carry a spare tire, camp table, bikes, and more with the UltraSwing Mega-Fit spare tire hitch mount.
The UltraSwing® Mega-Fit spare tire hitch mount is a swing-out carrier designed for full-size trucks, vans, and SUVs including F-150, Tundra, Silverado, RAM, Transit, Sprinter, Sequoia, and most any other full-size truck, van, or SUV with a 2” or 2.5” hitch and stock bumper. With an adjustable tire carrier mount for up to 40” tires and an off-set swing-out hitch for bike racks and other accessories, the UltraSwing Mega-Fit is purpose-built to carry all your rig’s essentials in one easy-to-use hitch mount.
For other vehicle, fitments check out the 4Runner and Multi-Fit versions of the UltraSwing®.
For Rivian and Tesla Model X/Y use our Multi-Fit L version.
Wanna save some dough? Contact us ([email protected]) after purchase about swapping to a Blem Latch!
Features:
- Tire and bikes swing out to access the rear hatch or tailgate
- License plate light kit now included with your Ultraswing purchase
- Rock-solid anti-wobble design for severe off-road use
- Hitch-mounted (⅝” hitch pin not included)
- Adjustable/removable wheel plate carries tires up to 40"
- Now featuring our UltraLatch™
- Proudly made in the USA
- Lifetime warranty
- U.S. Patent No. 11,220,303
Technical Specifications:
- Supports a combined weight of 275 lbs
- Max Tongue Rating on Secondary Hitch is 150lbs
- Weighs 79 lbs with wheel plate
- USA SAE J684-2014 Tow Rated lower receiver (Class 4- 10,000 lbs/1,000 lb tongue) & Australia ADR Compliant AS4177.1 for tow bars and towing brackets, up to mass of ATM of 3,500kg
- Zinc Prime with a Black powder coat finish
- Optimized fitment for full-size trucks, vans, and SUVs
Accessory mounting options include the camp table, fuel mounts, Hi-Lift® mounts, and more.
Click here to add a backup camera relocation kit.
Note: If mounting a tire and bike rack you will need our hitch extension (not needed for RambleRack).
**NOT COMPATIBLE WITH VERTICAL RACKS. UltraSwing is incompatible with their hitch and tongue ratings - refer to your rack's manufacture requirements**
Fitment Requirements:
Click here to confirm fitment.The UltraSwing Mega-Fit spare tire hitch mount will work on a wide range of vehicles. Shoot us an email to confirm your vehicle fitment at [email protected].
NOTE: You will need 4" or less from your vehicle's hitch pin hole to the furthest protruding point of your bumper.
Click here for the installation guide.
Still have questions? Check out the UltraSwing FAQ page.
WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Original: $1,569.00
-65%$1,569.00
$549.15More Images
UltraSwing® Mega-Fit Spare Tire Hitch Mount
UltraSwing® Mega-Fit is in-stock and has a 1-2 week processing time.
Carry a spare tire, camp table, bikes, and more with the UltraSwing Mega-Fit spare tire hitch mount.
The UltraSwing® Mega-Fit spare tire hitch mount is a swing-out carrier designed for full-size trucks, vans, and SUVs including F-150, Tundra, Silverado, RAM, Transit, Sprinter, Sequoia, and most any other full-size truck, van, or SUV with a 2” or 2.5” hitch and stock bumper. With an adjustable tire carrier mount for up to 40” tires and an off-set swing-out hitch for bike racks and other accessories, the UltraSwing Mega-Fit is purpose-built to carry all your rig’s essentials in one easy-to-use hitch mount.
For other vehicle, fitments check out the 4Runner and Multi-Fit versions of the UltraSwing®.
For Rivian and Tesla Model X/Y use our Multi-Fit L version.
Wanna save some dough? Contact us ([email protected]) after purchase about swapping to a Blem Latch!
Features:
- Tire and bikes swing out to access the rear hatch or tailgate
- License plate light kit now included with your Ultraswing purchase
- Rock-solid anti-wobble design for severe off-road use
- Hitch-mounted (⅝” hitch pin not included)
- Adjustable/removable wheel plate carries tires up to 40"
- Now featuring our UltraLatch™
- Proudly made in the USA
- Lifetime warranty
- U.S. Patent No. 11,220,303
Technical Specifications:
- Supports a combined weight of 275 lbs
- Max Tongue Rating on Secondary Hitch is 150lbs
- Weighs 79 lbs with wheel plate
- USA SAE J684-2014 Tow Rated lower receiver (Class 4- 10,000 lbs/1,000 lb tongue) & Australia ADR Compliant AS4177.1 for tow bars and towing brackets, up to mass of ATM of 3,500kg
- Zinc Prime with a Black powder coat finish
- Optimized fitment for full-size trucks, vans, and SUVs
Accessory mounting options include the camp table, fuel mounts, Hi-Lift® mounts, and more.
Click here to add a backup camera relocation kit.
Note: If mounting a tire and bike rack you will need our hitch extension (not needed for RambleRack).
**NOT COMPATIBLE WITH VERTICAL RACKS. UltraSwing is incompatible with their hitch and tongue ratings - refer to your rack's manufacture requirements**
Fitment Requirements:
Click here to confirm fitment.The UltraSwing Mega-Fit spare tire hitch mount will work on a wide range of vehicles. Shoot us an email to confirm your vehicle fitment at [email protected].
NOTE: You will need 4" or less from your vehicle's hitch pin hole to the furthest protruding point of your bumper.
Click here for the installation guide.
Still have questions? Check out the UltraSwing FAQ page.
WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
UltraSwing® Mega-Fit is in-stock and has a 1-2 week processing time.
Carry a spare tire, camp table, bikes, and more with the UltraSwing Mega-Fit spare tire hitch mount.
The UltraSwing® Mega-Fit spare tire hitch mount is a swing-out carrier designed for full-size trucks, vans, and SUVs including F-150, Tundra, Silverado, RAM, Transit, Sprinter, Sequoia, and most any other full-size truck, van, or SUV with a 2” or 2.5” hitch and stock bumper. With an adjustable tire carrier mount for up to 40” tires and an off-set swing-out hitch for bike racks and other accessories, the UltraSwing Mega-Fit is purpose-built to carry all your rig’s essentials in one easy-to-use hitch mount.
For other vehicle, fitments check out the 4Runner and Multi-Fit versions of the UltraSwing®.
For Rivian and Tesla Model X/Y use our Multi-Fit L version.
Wanna save some dough? Contact us ([email protected]) after purchase about swapping to a Blem Latch!
Features:
- Tire and bikes swing out to access the rear hatch or tailgate
- License plate light kit now included with your Ultraswing purchase
- Rock-solid anti-wobble design for severe off-road use
- Hitch-mounted (⅝” hitch pin not included)
- Adjustable/removable wheel plate carries tires up to 40"
- Now featuring our UltraLatch™
- Proudly made in the USA
- Lifetime warranty
- U.S. Patent No. 11,220,303
Technical Specifications:
- Supports a combined weight of 275 lbs
- Max Tongue Rating on Secondary Hitch is 150lbs
- Weighs 79 lbs with wheel plate
- USA SAE J684-2014 Tow Rated lower receiver (Class 4- 10,000 lbs/1,000 lb tongue) & Australia ADR Compliant AS4177.1 for tow bars and towing brackets, up to mass of ATM of 3,500kg
- Zinc Prime with a Black powder coat finish
- Optimized fitment for full-size trucks, vans, and SUVs
Accessory mounting options include the camp table, fuel mounts, Hi-Lift® mounts, and more.
Click here to add a backup camera relocation kit.
Note: If mounting a tire and bike rack you will need our hitch extension (not needed for RambleRack).
**NOT COMPATIBLE WITH VERTICAL RACKS. UltraSwing is incompatible with their hitch and tongue ratings - refer to your rack's manufacture requirements**
Fitment Requirements:
Click here to confirm fitment.The UltraSwing Mega-Fit spare tire hitch mount will work on a wide range of vehicles. Shoot us an email to confirm your vehicle fitment at [email protected].
NOTE: You will need 4" or less from your vehicle's hitch pin hole to the furthest protruding point of your bumper.
Click here for the installation guide.
Still have questions? Check out the UltraSwing FAQ page.
WARNING: This product can expose you to chemicals that are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
